Cisco Command and Routing Guide
Manual and reference for essential configuration and routing commands on Cisco devices.
0views
In this section, we document the essential commands for administering Cisco network devices in our labs, including mode transitions and routing verification.
Operation Modes in Cisco IOS
Sección titulada «Modos de Operación en Cisco IOS»To configure a Cisco device, we must navigate through different privilege levels:
- User Mode (User EXEC): Allows basic visualization.
Router>
- Privileged Mode (Privileged EXEC): Allows viewing detailed configurations and performing diagnostics. We access with
enable.Router> enableRouter# - Global Configuration Mode: Allows modifying the general configuration of the equipment. We access with
configure terminal.Router# configure terminalRouter(config)#
Supported Routing Protocols
Sección titulada «Protocolos de Enrutamiento Soportados»For the dynamic interconnection of networks in our testing scenarios, we configure and verify different routing protocols.
- RIP Dynamic Routing: See the detailed configuration and verification command guide in RIP Configuration.
Useful Verification Commands
Sección titulada «Comandos Útiles de Verificación»- View the complete routing table:
Ventana de terminal Router# show ip route - View the active configuration in RAM:
Ventana de terminal Router# show running-config - Check the physical and logical status of the interfaces:
Ventana de terminal Router# show ip interface brief

